HDMI Interface

Model 3/Y HDMI InterfaceEVOffer

Product Compatibility

Packing List

HDMI Interface ECU
LCD Cable
LCD Extension Cable
Power and CAN Cable (For Intel MCU)
Power and CAN Cable (For AMD MCU)
Remote Control
Toggle Button with Cable
Infrared Receiver with Cable
AUX Cable
FM Transmitter

Cable Connection

PWR/CAN: Connect provided Power and CAN Cable
CAM IN: Future Use
AUX OUT: Connect provided AUX cable
B/T SUB: No Use
T/S OUT: Future Use
HDMI IN: HDMI input
LVDS-IN: Future Use
OEM IN: Connect the supplied LCD cable to the OEM head unit
OEM OUT: Connect the OEM LCD cable coming from the OEM monitor
MODE: Connect provided toggle button cable
IR: Connect provided infrared receiver cable
DFU: Connect USB Type-C Cable for firmware update
DIP S/W: DIP SWITCH setting

Installation

Step 1 - Run the Power and CAN Harness

The ECU harness includes 2 sets of Power and CAN Cable. Depending on the model year of your car, you'll connect the power, ground, and CAN Bus in different locations:

For Model 3/Y with Intel Atom MCU:

For Model 3/Y with AMD Ryzen MCU:

On the right side of the car, release the upper clip that attaches the middle A-Pillar trim to the vehicle. Then, pull the trim upwards to remove it.

Release the topmost clip on the lower A-pillar trim.

Pull the rearmost part of the lower A-pillar trim upward to release the clips and tabs. Then, pull the entire trim rearward to remove it from the vehicle.

Connect the CAN to the blue CAN port.

Connect the power wire to temperature sensor connector.